Wireless Network Projection
84
a
If you need to assign the SSID manually, select
SSID
to enter the
SSID.
i
For the
Advanced
connection mode, assign the IP settings for your
network as necessary.
• If your network assigns addresses automatically, select
IP Settings
to
set the
DHCP
setting to
On
.
• If you must set addresses manually, select
IP Settings
to set the
DHCP
setting to
Off
, and then enter the projector's
IP Address
,
Subnet Mask
, and
Gateway Address
as necessary.
• If you want to connect the projector to the network using IPv6, select
IPv6 Settings
to set the
IPv6
setting to
On
, and then set the
Auto
Configuration
and
Use Temporary Address
settings as necessary.
j
To prevent the SSID or IP address from being displayed on the LAN
standby screen and Home screen, set the
SSID Display
setting or the
IP
Address Display
setting to
Off
.
k
When you finish selecting settings, select
Complete
and follow the on-
screen instructions to save your settings and exit the menus.
l
Press the [LAN] button on the remote control.
The wireless network settings are complete when you see the correct IP
address on the LAN standby screen.
When you have finished making wireless settings for your projector, you need
to select the wireless network on your computer. Then start the network
software to send images to your projector through a wireless network.
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your
computer.
a
To access your wireless utility software, click the network icon on the
Windows taskbar.
b
When connecting in Advanced connection mode, select the network
name (SSID) of the network the projector is connecting to.
c
Click
Connect
.
