Epson EH-TW710 User Manual Download Page 150

Page: 150 / 179

Projector Indicator Status

150

The indicators on the projector indicate the projector status and let you know

when a problem occurs. Check the status and color of the indicators and then

refer to this table for a solution.

• If the indicators display a pattern not listed in the table below, turn

the projector off, unplug it, and contact Epson for help.

Power indicator

Status indicator

Wireless LAN indicator

Lamp indicator

Temp (temperature) indicator

Projector status

Indicator and status

Problem and solutions

Power: Lit blue
Status: Lit blue
Lamp: Off
Temp: Off

Normal operation.

Indicator and status

Problem and solutions

Power: Lit blue
Status: Flashing blue
Lamp: Off
Temp: Off

Warming up, shutting down, or cooling down.
When warming up, wait about 30 seconds for an image

to appear.
All buttons are disabled during warm-up, shutting

down, and cooling down.

Power: Lit blue
Status: Off
Lamp: Off
Temp: Off

Standby, sleep mode, or monitoring.
When you press the power button, projection starts.

Power: Flashing blue
Status: Off
Lamp: Off
Temp: Off

Preparing for monitoring and all features are disabled.

Power: Flashing blue
Status: Indicator status

varies
Lamp: Indicator status

varies
Temp: Flashing orange

Projector is too hot.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Clean or replace the air filter.
• Make sure the environmental temperature is not too

hot.

Power: Off
Status: Flashing blue
Lamp: Off
Temp: Lit orange

Projector has overheated and turned off. Leave it turned

off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Make sure the environmental temperature is not too

hot.

• Clean or replace the air filter.
• If operating the projector at high altitude, set the

High

Altitude Mode

setting to

in the projector's menu.

Extended

Operation

High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Summary of Contents for EH-TW710




















































































































































































Search results

Summary of Contents for EH-TW710

Reviews:

Related manuals for EH-TW710

Brands by name

Popular brands

Epson EH-TW710, User Manual

Search results

Summary of Contents for EH-TW710

Reviews:

Related manuals for EH-TW710

Brands by name

Popular brands