Basic Operations
29
Adjusting the Projection Size (Adjust Zoom)
Grip the knob and turn the zoom ring to adjust the size of the projected image.
Adjusting the Projector's Tilt
If the projected image is horizontally tilted (the left and right sides of the projected image are at different
heights) when the projector is setup on a table, adjust the front foot so that both sides are level with each other.
Adjusting the Position of the Image (Lens Shift)
If the projector cannot be installed directly in front of the screen, you can adjust the position of the image by
using lens shift.
Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the image. To locate
the center of the lens shift range, turn the lens shift dial until you hear it click.
