Epson EH-TW5910 User Manual Download Page 33

Page: 33 / 107

Adjusting the Image

Absolute Color Adjustments

Adjusting Hue, Saturation, and Brightness

You can adjust the hue, saturation, and brightness for each of the R (red), G (green), B (blue), C (cyan), M
(magenta), and Y (yellow) colors.

Hue

Adjusts the overall color of the image to be blue, green, or red.

Saturation

Adjusts the overall vividness of the image.

Brightness

Adjusts the overall color brightness of the image.

Press the

button.

EH-TW6100W

EH-TW6100/EH-

TW5950

You can make settings from the
configuration menu.

Image

Advanced

RGBCMY

p.66

Use the

buttons to

select the color you want to adjust,
and then press the

button to

confirm the selection.

Use the

buttons to

select

Hue

Saturation

, or

Brightness

Use the

buttons to make

adjustments.

Press the

button to adjust another

color.

Press the

button to return the

adjustments to their default values.

Press the

button to exit the

menu.

Summary of Contents for EH-TW5910












































































































Search results

Summary of Contents for EH-TW5910

Reviews:

Related manuals for EH-TW5910

Brands by name

Popular brands

Epson EH-TW5910, User Manual

Search results

Summary of Contents for EH-TW5910

Reviews:

Related manuals for EH-TW5910

Brands by name

Popular brands