Epson EH-TW5910, User Manual

Page: 23 / 107

Basic Operations
22
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the power cable.
Connect using the power cable supplied.
b
Remove the lens cover.
c
Turn on the connected equipment.
d
Turn the power on.
Remote control Control panel
c
When Direct Power On is set to
On , you can start projecting by
simply connecting the power
cable to the projector without
having to press any buttons.
s
Extended - Operation - Direct
Power On p.73
Warning
Do not look into the lens during projection.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
s
Settings - Child
Lock / Control Panel Lock p.71
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On .
s
Extended - Operation -
High Altitude Mode p.73
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
s
Signal - Auto Setup p.68
•
Do not attach the lens cover during projection.
•
If the projector is suspended from a ceiling, after removing the lens cap, make sure you keep it in a safe
place as you will need to attach it when transporting the projector.