Maintenance
75
Warning
Do not disassemble or remodel the lamp. If a modified or disassembled lamp is installed in the projector
and used, it could cause a fire, electric shock, or an accident.
Caution
•
Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does
not turn on.
•
The lamp contains mercury (Hg). Dispose of used lamps in accordance with your local laws and regulations.
When using in a company, observe your companies rules and regulations.
Resetting lamp hours
After replacing the lamp, make sure you reset the lamp hours.
The projector records how long the lamp is turned on and a message and indicator notify you when it is time
to replace the lamp.
a
Turn on the power.
b
Press the [Menu] button.
Remote control
Control panel
The Configuration menu is displayed.
c
Select
Reset
-
Reset Lamp Hours
.
A reset confirmation message is displayed.
d
Use the left and right buttons to select
Yes
, and then press the [Enter] button
to execute.
The lamp hours are reset.
