Epson EH-TW5750 User Manual Download Page 39

Page: 39 / 92

Adjusting the Image

Adjusting Hue, Saturation, and Brightness

You can adjust the hue, saturation, and brightness for each of the R (red), G (green), B (blue), C (cyan), M
(magenta), and Y (yellow) colors.

Hue

Adjusts the overall color of the image to be blue, green, or red.

Saturation

Adjusts the overall vividness of the image.

Brightness

Adjusts the overall color brightness of the image.

Press the [Menu] button to display
menus in the order

Image

Advanced

RGBCMY

Remote control

Control panel

Use the up and down buttons to select
the color you want to adjust, and then
press the [Enter] button to confirm the
selection.

Use the up and down buttons to select

Hue

Saturation

, or

Brightness

Use the left and right buttons to make
adjustments.

Press the [Esc] button to adjust another
color.

Press the [Menu] button to exit the
menu.

Summary of Contents for EH-TW5750





























































































Search results

Summary of Contents for EH-TW5750

Reviews:

Related manuals for EH-TW5750

Brands by name

Popular brands

Epson EH-TW5750, User Manual

Search results

Summary of Contents for EH-TW5750

Reviews:

Related manuals for EH-TW5750

Brands by name

Popular brands