Epson EH-TW570, User Manual

Page: 94 / 151

Submenu Function
IP Settings
(This item can only be set if Connection Mode is set to
Advanced .)
You can make network settings.
DHCP : Set to On to make network settings using DHCP
g
. If this
is set to On , you cannot set any more addresses.
IP Address : You can input the IP address
g
assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask : You can input the subnet mask
g
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address : You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display To prevent the SSID
g
from being displayed on the LAN Standby
screen, set this to Off .
IP Address Dis‐
play
To prevent the IP address
g
from being displayed on the LAN
Standby screen, set this to
Off
.
Security menu
Available when the Wireless LAN unit is installed.
Submenu Function
Security
Select the security type from the items that are displayed.
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.
List of Functions
94