Epson EH-TW570, User Manual

Page: 39 / 151

a
•
Auto V-Keystone works only when Projection is set to Front from
the Configuration menu.
s
Extended - Projection p.89
•
If you do not want to enable Auto V-Keystone, set Auto V-
Keystone to Off .
s
Settings - Keystone - H/V-Keystone - Auto V-Keystone
p.88
Correcting manually
You can manually correct keystone distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 30˚ right and left/approx. 30˚ up and down
H-Keystone Adjuster
Move the horizontal keystone adjuster to the right or left to perform
horizontal keystone correction.
a
•
When using horizontal keystone adjuster, set H-Keystone Adjuster
to On .
s
Settings - Keystone - H/V-Keystone - H-Keystone Adjuster
p.88
•
You can also correct keystone distortion in the horizontal direction
using H/V-Keystone.
H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
a
Press the [
w
] or [
v
] button on the control panel during
projection to display the Keystone screen.
b
Press the following buttons to correct keystone distortion.
Press the [
w
] or [
v
] button to correct vertical distortion.
Adjusting Projected Images
39