Epson EH-TW570, User Manual, Page: 30 / 151

Installing the Wireless LAN Unit
By installing the supplied or optional wireless LAN unit, you can project
the computer screen that is connected to the wireless LAN over a network.
Connect the wireless LAN unit to the projector's USB-A port.
a
•
When connecting to the network using wireless LAN, make sure you
make network settings from the Configuration menu.
s
"Wireless LAN menu" p.93
•
When moving the projector, make sure you remove the wireless
LAN unit for safety reasons.
Installing the Quick Wireless Connection USB Key
When installing the optional Quick Wireless Connection USB Key, you
need to remove the Wireless LAN unit first, and then connect the Quick
Wireless Connection USB Key to the USB-A port.
a
If the Wireless LAN unit is installed on the projector, press
the [LAN] button on the remote control.
The LAN standby screen is displayed.
b
Check that the SSID and IP address information are displayed on
the LAN standby screen, and then remove the Wireless LAN
unit.
c
Connect the Quick Wireless Connection USB Key to the USB-A
port.
d
When the message "Network information update complete.
Remove the Quick Wireless Connection USB Key Adapter." is
displayed, remove the Quick Wireless Connection USB Key.
e
Reinstall the Wireless LAN unit on the projector.
f
Connect the Quick Wireless Connection USB Key to the computer
you are using.
For the steps from here on, see the User's Guide supplied with the
Quick Wireless Connection USB Key.
Connecting Equipment
30