manualshive.com logo in svg

Epson EH-TW5400, User Manual, Page: 60 / 112

Share
Download
Epson EH-TW5400 User Manual Download Page 60

Using the Projector on a Network (EH-TW5650 Only)

59

Projecting in Screen Mirroring

You can send images to your projector from mobile devices such as laptops, smartphones, and tablets using
Miracast technology.

If your device supports Miracast, you do not need to install any additional software. When using a Windows
computer, make sure that you have the necessary adapter for establishing a Miracast connection.

Note the following limitations when using Screen Mirroring features.

•

You cannot play interlaced images.

•

You cannot play multi-channel audio over 3ch (channel 3).

•

You cannot project images with a resolution above 1920 x 1080 and a frame rate above 30 fps.

•

You cannot play 3D video.

•

Depending on the device being used, you may not be able to play content that is copyright protected over a
Miracast connection.

•

The audio and connection to Bluetooth audio devices may be lost due to radio wave interference.

•

Audio may continue to be output from Screen Mirroring even when projecting images from a source other than
Screen Mirroring.

•

Do not change the projector's 

Screen Mirroring Settings

 during Screen Mirroring projection. Doing so may cause

the projector to disconnect and it may take a while to re-connect.

•

While projecting using Screen Mirroring, do not turn off the projector using the power breaker.

c

Mobile devices with Android installed or Windows 8.1 or later installed mainly support Miracast.
Support for Miracast varies depending on the mobile device. See your mobile device manual for
details.

Selecting Screen Mirroring Settings

Select 

Screen Mirroring Settings

 on your projector to project images from your mobile device.

a

Press the 

 button to display menus in the order 

Network

 - 

Screen Mirroring

.

b

Use the 

 buttons to select 

On

, and then press the 

 button.

Summary of Contents for EH-TW5400

















































































































Reviews:

No comments