Adjusting the Image
41
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving a Memory
You can save the adjustment values for
Image
from the Configuration menu.
a
Press the
button, and then make
the settings for
Image
that you want
to save.
b
Press the
button.
c
Use the
buttons to
select
Save Memory
, and then press
the
button to confirm the
selection.
d
Use the
buttons to
select the memory name to be saved,
and then press the
button to
confirm the selection.
The current projector settings are saved to
the memory.
If the mark on the left of the memory name
is turned aqua, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select
Yes
, the
previous content is erased and the current
settings are saved.
Loading, Deleting, and Renaming a Memory
You can load, delete, and rename registered memories.
Press the
button, and then select the target function on the screen displayed.
Function
Explanation
Load Memory
Loads the saved memory. When you select a memory and press the
button, the settings applied to the current image are replaced with the
settings from the memory.
Erase Memory
Erases a saved memory. When you select a memory name and press the
button, a message is displayed. Select
Yes
, and then press the
button to erase the selected memory.
Summary of Contents for EH-TW5400
Page 1: ...User s Guide ...
