Epson EH-TW5400 User Manual Download Page 26

Page: 26 / 112

Basic Operations

Projecting Images

Turning On the Projector

Connect the equipment to the
projector.

Connect using the power cord
supplied.

Press the

button on the remote

control or the control panel.

Remote control

Control panel

The operation indicator flashes blue as the
projector warms up. Once the projector is
warmed up, the operation indicator stops
flashing and turns blue.

When

Direct Power On

is set to

, you can start projecting by

simply connecting the power cord
to the projector without having to
press any buttons.

Extended

Operation

Direct Power

p.71

Open the lens cover.

Turn on the connected equipment.

Warning

•

Do not look into the lens during projection. The
powerful light emitted could cause damage to
eyesight.

•

Do not stand in front of the lens during projection.
Clothes could be damaged due to the high
temperature.

Summary of Contents for EH-TW5400

















































































































Search results

Summary of Contents for EH-TW5400

Reviews:

Related manuals for EH-TW5400

Brands by name

Popular brands

Epson EH-TW5400, User Manual

Search results

Summary of Contents for EH-TW5400

Reviews:

Related manuals for EH-TW5400

Brands by name

Popular brands