Epson EH-TW420 User Manual Download

Page: 27 / 99

Security Functions

Restricting Operation (Control Panel Lock)

Do one of the following to lock the operation buttons on the control panel.
• Full lock

All of the buttons on the control panel are locked. You cannot perform
any operations from the control panel, including turning the power on or
off.

• Partial lock

All of the buttons on the control panel, except for the [

] button, are

locked.

This is useful at events or shows when you want to deactivate all buttons
and only project, or at schools when you want to limit button operation.
The projector can still be operated using the remote control.

Press the [Menu] button and select "Settings"

"Control Panel Lock" in the configuration menu.

p.30

Check the buttons you can use and the operations they perform in
the guide under the menu.

Select either "Full Lock" or "Partial Lock".

Procedure

Using the remote control

Using the control panel

Summary of Contents for EH-TW420




































































































Search results

Summary of Contents for EH-TW420

Reviews:

Related manuals for EH-TW420

Brands by name

Popular brands

Epson EH-TW420, User Manual

Search results

Summary of Contents for EH-TW420

Reviews:

Related manuals for EH-TW420

Brands by name

Popular brands