Blurring the Edges of the Image (Flexible Picture)
65
You can blur the edges of the projected image so that the image blends into
the wall you are projecting on to.
a
Turn on the projector and display an image.
b
Press the
button on the remote control to display the Flexible
Picture menu.
a
You cannot use this button when displaying the Installation
menu.
c
Press the
button to blur the edges of the projected image.
a
You can reset the function by pressing the
button
again.
d
Press
to close the Flexible Picture menu.
a
You can reset all settings in the Flexible Picture menu by pressing the
button while displaying the Flexible Picture menu.
