Troubleshooting
82
About Event ID
Check the event ID and perform the remedy given below. If you cannot resolve the problem, contact your
local dealer or the nearest Epson repair center.
s
Event ID
Cause
Remedy
0022
0027
0028
0029
0030
0031
0035
0434
0481
0482
0485
Network communication is unstable.
Check the network communication status, and
reconnect after waiting for a while.
0432
0435
Failed to start the network software.
Restart the projector.
0433
An image that was transferred cannot be re-
produced.
Restart the network software.
0484
Communications was cut off from the comput-
er.
04FE
The network software ended unexpectedly.
Check the status of network communications.
Wait for a while and then try connecting again.
0479
04FF
A system error occurred in the projector.
Restart the projector.
0891
The same SSID access point cannot be found.
Set the computer, the access point, and the
projector to the same SSID.
0892
WPA and WPA2 authentication type mismatch. Check the setting of wireless LAN security to
see if it is correct.
0894
Communications was cut off because a con-
nection was made to the wrong access point.
Check with the network administrator and fol-
low their instructions.
0898
Failed to acquire the DHCP.
Check that the DHCP server is operating cor-
rectly. Turn off the DHCP setting if you are not
using DHCP.
s
Network
-
Network Configu-
ration
-
Wireless LAN
-
IP Settings
-
DHCP
0020
0026
0032
0036
0037
0038
0899
Other connection errors
If restarting the projector or network software
does not solve the problem, contact your local
dealer or the nearest address provided in the
Epson Projector Contact List.
s
