Using the Projector on a Network
48
Projecting Using Wired LAN
You can send images to your projector through a wired network.
To do this, connect the projector to your network, and then set up your projector and computer for network
projection.
When you have finished making projector connection and network settings, install Epson iProjection
(Windows/Mac) from the following Web site.
You can use Epson iProjection to project computer images over a network. You can also hold dynamic
meetings by projecting images from multiple computers connected to the network at the same time. See
the Epson iProjection Operation Guide (Windows/Mac) for more information.
Selecting Wired Network Settings
Before you can project images over a network, you need to connect the Wireless LAN unit (ELPAP10) and
configure network settings on the projector.
c
Before making settings, connect a LAN cable to the LAN port, and connect the projector to the wired
LAN.
a
Press the [Menu] button to display menus in the order
Network
-
Network Configuration
.
Remote control
Control panel
b
Select
Basic
, and then set the following as necessary.
•
Projector Name
: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
•
PJLink Password
: Set a password to use when you control the projector using compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
•
Remote Password
: Set a password to use when you operate the projector from a smartphone or a tablet. You
can enter up to single-byte 8 alphanumeric characters.
•
Display LAN Info.
: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Use the up/down/
left/right buttons on the remote control to select characters, and then press the [Enter] button
to confirm the selection.
c
Select
Wired LAN
, and then press the [Enter] button.
