Basic Operations
25
Turning Off
a
Turn off the connected equipment.
b
Press the standby button on the
remote control or on top of the
projector.
Remote control
Top of projector
A confirmation message is displayed.
c
Press the standby button again.
The status indicator flashes and the
projector begins to cool down.
c
When
Standby Confirmation
is
set to
Off
, you can turn off the
projector by pressing the button
on the remote control once.
s
Extended
-
Display
-
Standby
Confirmation
d
Wait until cool-down is complete.
When cool-down is complete, the status
indicator stops flashing.
e
Disconnect the power cord.
c
•
If the power cord is connected,
some electricity is consumed
even if no operations are made.
•
When connecting the power cord
again, wait a sufficient time
interval.
f
Attach the lens cap.
c
When
USB Power in Standby
is set to
On
, power is supplied to the streaming media player even
when the projector is in standby mode (power off); this helps to speed up turning on the streaming
media player.
s
Extended
-
Operation
-
USB Power in Standby
