manualshive.com logo in svg

Epson EH-LS10500, User Manual

Share
Download
Epson EH-LS10500 User Manual Download Page 88

Troubleshooting

87

Check

Remedy

Has the power to the AV amplifier been dis-
connected?

If an AV amplifier is connected, check the AV amplifier's power
supply.

Is an image signal being sent from the device? Check that an image signal is being sent from the connected

device.

Is the image signal format setting correct?

When Video is input
If nothing is projected even when 

Video Signal

 is set to 

Auto

from the Configuration menu, set the signal that matches the
connected device. 

s

 

Settings

 - 

Input Signal

 - 

Video Sig-

nal

 

 p.73

When Component is input
If nothing is projected even when 

Component

 is set to 

Auto

from the Configuration menu, set the signal that matches the
connected device. 

s

 

Settings

 - 

Input Signal

 - 

Compo-

nent

 

 p.73

Are the Configuration menu settings correct? Reset all of the settings. 

s

 

Reset

 - 

Reset All

 

 p.82

(Only when projecting computer image sig-
nals)

Was the connection made while the power of
the projector or the computer was already
turned on?

If the connection is made while the power is already turned on,
the key (Function key and so on) that changes the computer's
image signal to external output may not work. Turn off the con-
nected computer, and then turn it back on.

Moving images are not displayed

Check

Remedy

(Only when projecting computer image sig-
nals)

Is the computer's image signal set to external
output and to output to the LCD monitor at
the same time?

Depending on the computer's specifications, moving images
may not be displayed when the computer is set to external out-
put and to the LCD monitor output at the same time.
Change it so that the image signal is set to external output only.
For the computer's specifications, see the documentation sup-
plied with the computer.

"Not supported"

 is displayed

Check

Remedy

Is the image signal format setting correct?

When Video is input
If nothing is projected even when 

Video Signal

 is set to 

Auto

from the Configuration menu, set the signal that matches the
connected device. 

s

 

Settings

 - 

Input Signal

 - 

Video Sig-

nal

 

 p.73

When Component is input
If nothing is projected even when 

Component

 is set to 

Auto

from the Configuration menu, set the signal that matches the
connected device. 

s

 

Settings

 - 

Input Signal

 - 

Compo-

nent

 

 p.73

(Only when projecting computer image sig-
nals)

Do the image signal's frequency and resolu-
tion correspond to the mode?

Check the image signal being input in 

Resolution

 from the Con-

figuration menu, and check that it corresponds to the projector's
resolution. 

s

 

 p.98

Summary of Contents for EH-LS10500
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands