Useful Functions
58
Memory Function
Settings that can be Saved
You can save some settings for the Configuration menu (Save Memory).
By saving settings, you can load settings made for specific images or scenes from the remote control (Load
Memory).
You can save the following Configuration menu settings.
Image
s
Color Mode, Power Consumption, Brightness, Contrast, Color Saturation, Tint, Sharpness,
Color Temp., Skin Tone, Dynamic Contrast
Advanced
Sharpness, Offset, Gain, Gamma, Hue, Saturation, Brightness, EPSON Super
White
Signal
s
Deinterlacing, Motion Detection, Super-resolution/4K, Detail Enhancement
Advanced
Noise Reduction, Setup Level, Overscan, HDMI Video Range
Saving the Memory
a
Make settings that you want to save to
the Configuration menu.
b
Press the
button.
c
Use the
buttons to
select
Save Memory
, and then press
the
button to confirm the
selection.
The
Save Memory
screen is displayed.
d
Use the
buttons to
select the memory name to be saved,
and then press the
button to
confirm the selection.
The current projector settings are saved as
a memory.
If the mark on the left of the memory name
is turned green, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select
Yes
, the
previous settings are deleted and the
current settings are registered.
c
You can save up to 10 memories.
