Useful Functions
56
Lens Position Function
You can save the focus, zoom, and lens shift positions for lens adjustment.
This allows you to load a saved lens position to quickly set the lens to the optimum projection position.
For example, you can easily load a lens position that was saved while projecting on a cinema scope screen,
or when multiple screens with different aspects were being used.
Saving the Lens Position
a
Adjust the focus, zoom, and lens shift
to the status you want to save.
b
Press the
button.
c
Use the
buttons to
select
Save Lens Position
, and then
press the
button to confirm the
selection.
The
Save Lens Position
screen is
displayed.
d
Use the
buttons to
select the lens position name to be
saved, and then press the
button
to confirm the selection.
The adjustment values are saved.
If the mark on the left of the lens position
name is turned green, it means the lens
position has already been registered. When
you select a registered lens position, a
message is displayed asking you to confirm
that you want to overwrite the lens
position. If you select
Yes
, the previous
settings are deleted and the current
settings are registered.
c
•
You can save up to 10 lens
positions.
•
If you save to
Memory1
or
Memory2
, you can load the
settings by pressing the
or
button on the remote
control.
Loading the Lens Position
a
Press the
button, and then select
Load Lens Position
.
The
Load Lens Position
screen is displayed.
