manualshive.com logo in svg

Epson EH-LS10500, User Manual

Share
Download
Epson EH-LS10500 User Manual Download Page 101

Appendix

100

Notes on Transportation

There are many glass parts and precision components inside the projector. To prevent damage due to impacts
when transporting, handle the projector as follows.

Moving Nearby

Before carefully moving the projector, make sure it has been turned off and all cables have been disconnected.

Attention

•

The projector is heavy and should not be carried by only one person. At least two people should carry the
projector when unpacking or moving.

•

When lifting the projector, make sure you close the control panel.

•

Do not apply excessive force to the control panel section. This may cause malfunctions to occur.

When Transporting

Preparing packaging

After checking the points in "Moving Nearby", set the vertical and horizontal lens positions to the center, and
then pack up the projector. 

s

 

 p.31

Notes when packing and transporting

Enclose the projector securely in buffer material to protect it from shock, and place it into a strong cardboard
container. Be sure to notify the carrier company that the contents are fragile.

Summary of Contents for EH-LS10500
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands