Home
/
Epson
/
EH-LS10000
/
User Manual

Epson EH-LS10000, User Manual, Page: 107 / 135

Share

Page: 107 / 135

Epson EH-LS10000 User Manual Download Page 107

Troubleshooting

106

"Not supported"

is displayed

Check

Remedy

Is the image signal format setting correct?

When Video is input
If nothing is projected even when

Video Signal

is set to

Auto

from the Configuration menu, set the signal that matches the
connected device.

s

Settings

-

Input Signal

-

Video Sig-

nal

When Component is input
If nothing is projected even when

Component

is set to

Auto

from the Configuration menu, set the signal that matches the
connected device.

s

Settings

-

Input Signal

-

Compo-

nent

(Only when projecting computer image sig-
nals)

Do the image signal's frequency and resolu-
tion correspond to the mode?

Check the image signal being input in

Resolution

from the Con-

figuration menu, and check that it corresponds to the projector's
resolution.

s

"No Signal"

is displayed

Check

Remedy

Are the cables connected correctly?

Check that all the cables required for projection are securely
connected.

s

Is the correct image input port selected?

Change the image with the source buttons on the remote con-
trol, or the

button on the control panel.

s

Is the connected device turned on?

Turn on the device.

(Only when projecting computer image sig-
nals)

Are the image signals being output to the
projector?

Change it so that the image signal is set to external output, and
not just the computer's LCD monitor. For some models, when
the image signals are output externally, they no longer appear
on the LCD monitor.
For the computer's specifications, see the documentation sup-
plied with the computer.

If the connection is made while the power of the projector or the
computer is already turned on, the Fn key (Function key) that
changes the computer's image signal to external output may not
work. Turn off the computer and the projector, and then turn
them back on.

When connecting an MHL device to the Wire-
lessHD Transmitter with an MHL cable, is it
connected to the HDMI5 port?

(EH-LS9600W only)

Connect to the HDMI5 port on the WirelessHD Transmitter.

The connected device is not compatible with MHL. For more de-
tails, contact the manufacturer of the device.

«
...
105
106
107
108
109
...
»

Summary of Contents for EH-LS10000








































































































































Reviews:

No comments