Epson EF11 User Manual Download Page 106

Page: 106 / 138

106

• If you connected an extension power cable, try projecting without it to see if it caused interference in

the signal.

Parent topic:

Solving Image or Sound Problems

Related references

Supported Video Display Formats

Related tasks

Adjusting Image Sharpness

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projector lens.

• Position the projector close enough to the screen, and directly in front of it.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Adjust the

Sharpness

setting to improve image quality.

• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to

match the projector's native resolution, if possible.

Parent topic:

Solving Image or Sound Problems

Related references

Projector Setup and Installation Options
General Projector Specifications

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Try selecting a color mode that best fits the image and environment.

Summary of Contents for EF11











































































































































Search results

Summary of Contents for EF11

Reviews:

Related manuals for EF11

Brands by name

Popular brands

Epson EF11, User Manual

Search results

Summary of Contents for EF11

Reviews:

Related manuals for EF11

Brands by name

Popular brands