Add Reception Information:
Prints reception information on the received fax, even if the sender does not set the header
information. The reception information includes the received date and time, sender's ID, and page
number (such as "P1"). When
Split Page Settings
is enabled, the split page number is also included.
Print Start Timing:
Select options to start printing the faxes to receive.
❏
All Pages Received: Printing starts after receiving all of the pages. To start printing from the first
page or last page depends on the setting of
Collation Stack
feature. See the explanation for
Collation Stack
.
❏
First Page Received: Starts printing when the first page is received, and then prints in order as the
pages are received. If the printer cannot start printing, such as when it is printing other jobs, the
printer starts printing received pages as a batch when it is available.
Collation Stack:
Since the first page is printed last (output to the top), the printed documents are stacked in the correct
page order. When the printer is running low on memory, this feature may not be available.
Print Suspend Time:
During the time period you specified from
Stop
through
Restart
you specified, the printer saves
documents received in the printer's memory without printing them. This feature can be used for
noise prevention at night or to prevent confidential documents from being disclosed while you are
away. Before using this feature, make sure there is enough free memory. When you set this to
Off
, you
can print the received documents even before the restart time.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings Menu
You can find the menu on the printer's control panel below:
Settings
>
Fax Settings
>
Report Settings
Fax Log Auto Print:
Prints the fax log automatically. Select
On(Every 30)
to print a log every time 30 fax jobs are
completed. Select
On(Time)
to print the log at a specified time. However, if the number of fax jobs
exceeds 30, the log is printed before the specified time.
Attach Fax image to report:
Prints a
Transmission Report
with an image of the first page of the sent document. Select
On(Large
Image)
to print the upper part of the page without reducing. Select
On(Small Image)
to print the
entire page reducing it to fit onto the report.
Report Format:
Selects a format for fax reports in
Fax
>
Menu
>
More
>
Fax Report
other than
Protocol Trace
.
Select
Detail
to print with error codes.
>
>
221
