Epson EcoTank ET-15000 Series User Manual Download Page 313

Page: 313 / 355

313

• The ink levels may be low. Visually check the ink levels.

• Make sure the paper type setting matches the type of paper you loaded.

• Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.

• Align the print head.

• Adjust the print quality in the product software.

• Clean the paper path.

• Clean the paper rollers.

• If you have not used the product for a long time, run the Power Cleaning utility.

Note:

Power Cleaning consumes a lot of ink, so run this utility only if you cannot improve print quality

by cleaning the print head.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Nozzle Check
Print Head Cleaning
Print Head Alignment

Related references

Paper or Media Type Settings - Control Panel

Related topics

Loading Paper

Grainy Printout

If your printouts are grainy, try these solutions:

• Make sure you loaded the printable side of the paper correctly for your product.

• Select a higher print quality setting and turn off any high speed settings in your product software.

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

Summary of Contents for EcoTank ET-15000 Series




































































































































































































































































































































































Search results

Summary of Contents for EcoTank ET-15000 Series

Reviews:

Related manuals for EcoTank ET-15000 Series

Brands by name

Popular brands

Epson EcoTank ET-15000 Series, User Manual

Search results

Summary of Contents for EcoTank ET-15000 Series

Reviews:

Related manuals for EcoTank ET-15000 Series

Brands by name

Popular brands