47
Enabling Wi-Fi Direct Mode (Simple AP)
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
To change the Wi-Fi Direct network name or password, follow the link at the end of this topic.
1.
From the home screen, select
Wi-Fi Setup
and press the
OK
button.
You see this screen:
2.
Press the arrow buttons to select
Wi-Fi Direct
and press the
OK
button.
3.
Press the
OK
button twice.
4.
Press the arrow buttons to display
Other OS Devices
and press the
OK
button.
5.
Press the down arrow button to see the Wi-Fi Direct network name and password.
6.
Press the
OK
button twice to exit.
You see the
AP
connection symbol on the LCD screen and should be able to print directly to your
product from your computer or device.
Note:
If the
AP
connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not
enabled. Repeat these steps to try again.
To disable Wi-Fi Direct, follow the steps above to display
Other OS Devices
and press the down arrow
button. Press the left or right arrow button to select
Disable Wi-Fi Direct
and press the
OK
button twice.
Press the
OK
button again to return to the main menu.
Parent topic:
Summary of Contents for EC-C110
Page 1: ...EC C110 User s Guide ...
Page 2: ......
Page 10: ......
Page 23: ...23 3 Remove the rear cover as shown ...
