95
Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management
g
When you have finished selecting settings, select
Complete
and follow
Protocol) software on network computers so they can monitor projectors. If
the on-screen instructions to save your settings and exit the menus.
your network uses this software, you can set up the projector for SNMP
monitoring.
a
Press the [Menu] button on the control panel or remote control.
b
Select the
Network
menu and press [Enter].
c
Select
Network Configuration
and press [Enter].
d
Select the
Others
menu and press [Enter].
e
Set the
SNMP
setting to
On
.
f
Enter up to two IP addresses to receive SNMP notifications, using 0 to
255 for each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
a
Summary of Contents for EB-S04
Page 1: ...User s Guide ...
Page 45: ...45 Image Shape Projector Feature Settings Settings Menu p 105 g g Related Links ...
Page 97: ...97 Using ESC VP21 Commands Flow control None Data length 8 bit Parity None Stop bit 1 bit ...
Page 102: ...102 Image Quality Settings Image Menu Available Color Modes p 53 g g Related Links ...
