Epson EB-S04, User Manual, Page: 101 / 166

101
Image Quality Settings - Image Menu
Settings on the
Image
menu let you adjust the quality of your image for the
Setting Options Description
input source you are currently using. The available settings depend on the
Color Temp. Color Temp. Sets the color tone based on color
currently selected input source.
temperature. The image is tinted blue
Customized
when a high value is selected and tinted
red when a low value is selected.
Color Temp. : select to set the color
temperature range from 3200K to
10000K (for sRGB mode) or from 0 to 10
(for other color modes).
Customized
: adjusts the individual R
(red), G (green), and B (blue)
components of the offset and gain.
Image Noise Reduction Reduces flickering in analog images.
Enhancement
Advanced
Deinterlacing Sets whether or not to convert
interlaced-to-progressive signals for
(For interlaced
certain video image types.
signal
[480i/576i/1080i] Off : for fast-moving video images.
input)
Video : for most video images.
To change settings for an input source, make sure the source is connected and
Film/Auto : for movies, computer
select that source.
graphics, and animation.
Auto Iris Off Adjusts the projected luminance based
Setting Options Description
on the image brightness when the Color
Normal
Mode is set to Dynamic or Cinema .
Color Mode See the list of Adjusts the vividness of image colors for
High Speed
available Color various image types and environments.
Reset — Resets all adjustment values except
Color
Modes
Mode on the Image menu to their
Brightness Varying levels Lightens or darkens the overall image.
default settings.
available
Contrast Varying levels Adjusts the difference between light and
available dark areas of the image.
• The
Brightness
setting does not affect lamp brightness. To change
the lamp brightness mode, use the Power Consumption setting in
a
Color Saturation Varying levels Adjusts the intensity of the image colors.
the projector's
ECO
menu.
available
• You cannot select the
Noise Reduction
setting when the following
Tint Varying levels Adjusts the balance of green to magenta
are being input.
available tones in the image.
• The Deinterlacing setting is set to Off .
Sharpness Varying levels Adjusts the sharpness or softness of
• A digital RGB signal is being input.
available image details.
• An interlaced signal (480i/576i/1080i) is being input.