Epson EB-S01 User'D Manual Download

Page: 10 / 103

All of the features in this guide are explained using illustrations of EB-W02
unless otherwise mentioned.

Front/Top

Name

Function

Air exhaust vent

Exhaust vent for air used to cool the projector internally.

Caution

While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent.

Sliding lens cover
knob

Slide the knob to open and close the lens cover.

Name

Function

Foot adjust lever

Press the foot adjust lever to extend and retract the front
adjustable foot.

"Adjusting the Image Position"

p.36

Front adjustable foot

When setup on a surface such as a desk, extend the foot to
adjust the position of the image.

"Adjusting the Image Position"

p.36

Sliding lens cover

Close when not using the projector to protect the lens.

Caution

While projecting, do not close the lens cover.

Remote receiver

Receives signals from the remote control.

Focus ring

Adjusts the image focus.

"Correcting the Focus"

p.37

Zoom ring
(EB-X14G/EB-W02/EB-
X02/EB-W01 only)

Adjusts the image size.

"Adjusting the Image Size"

p.36

Air intake vent
(air filter)

Takes in air to cool the projector internally.

"Cleaning the Air Filter"

p.79

Air filter cover

Opens and closes the air filter cover.

"Replacing the Air Filter"

p.84

Speaker

Outputs audio.

Indicators

Indicates the projector's status.

"Reading the Indicators"

p.66

Control panel

Operates the projector.

"Control Panel"

p.13

Lamp cover

Open when replacing the projector's lamp.

"Replacing the Lamp"

p.81

Part Names and Functions

Summary of Contents for EB-S01








































































































Search results

Summary of Contents for EB-S01

Reviews:

Related manuals for EB-S01

Brands by name

Popular brands

Epson EB-S01, User'D Manual

Search results

Summary of Contents for EB-S01

Reviews:

Related manuals for EB-S01

Brands by name

Popular brands