Epson EB-PU2113B User Manual Download

Page: 192 / 193

Notices

192

shielded equipment interface cable with this device. If this equipment has

more than one interface connector, do not leave cables connected to unused

interfaces. Changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

Indication of the manufacturer and the importer in

accordance with requirements of EU directive

Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
http://www.epson.com/

Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam

Zuidoost
The Netherlands
Telephone: 31-20-314-5000
http://www.epson.eu/

Indication of the manufacturer and the importer in

accordance with requirements of United Kingdom

directive

Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
http://www.epson.com/

Importer: Epson (UK) Ltd.
Address: Westside, London Road, Hemel Hempstead, Hertfordshire, HP3 9TD,

United Kingdom
http://www.epson.co.uk

Restriction of Use

When this product is used for applications requiring high reliability/safety

such as transportation devices related to aviation, rail, marine, automotive

etc.; disaster prevention devices; various safety devices etc; or

functional/precision devices etc, you should use this product only after giving

consideration to including fail-safes and redundancies into your design to

maintain safety and total system reliability. Because this product was not

intended for use in applications requiring extremely high reliability/safety

such as aerospace equipment, main communication equipment, nuclear

power control equipment, or medical equipment related to direct medical care

etc, please make your own judgment on this product’s suitability after a full

evaluation.

Operating System References

• Microsoft

Windows

8.1 operating system

• Microsoft

Windows

10 operating system

In this guide, the operating systems above are referred to as "Windows 8.1"

and "Windows 10". Furthermore, the collective term "Windows" is used to

refer to them all.
• macOS 10.13.x
• macOS 10.14.x
• macOS 10.15.x
• macOS 11.0.x
In this guide, the collective term "Mac" is used to refer to all of the operating

systems above.

Summary of Contents for EB-PU2113B


































































































































































































Search results

Summary of Contents for EB-PU2113B

Reviews:

Related manuals for EB-PU2113B

Brands by name

Popular brands

Epson EB-PU2113B, User Manual

Search results

Summary of Contents for EB-PU2113B

Reviews:

Related manuals for EB-PU2113B

Brands by name

Popular brands