214
4.
Select any of the following:
• To run the light source calibration now, select
Run Now
.
• To automatically run the light source calibration every 100 hours of projector usage, select
Run
Periodically
.
• To schedule automatic calibration, select
Schedule Settings
.
• To see the last time the projector performed a calibration, select
Last Run
.
5.
When you are finished, press the
Menu
button to exit the menus.
Parent topic:
Related references
Projector Environmental Specifications
Scheduling Projector Events
You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Caution:
Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note:
The
Schedule
setting in the Menu Protection menu must be turned off to schedule an event.
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Related tasks
Selecting Password Security Types
Running Light Source Calibration
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note:
Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, if the projector has been running for more than 24 hours, or if the projector is regularly turned
Summary of Contents for EB-L520U
