
91
8.
Select a number for the SMTP server
Port Number
setting, from 0 to 65535 (default is 25).
9.
Enter a
User Name
for the SMTP server.
10. Enter a
Password
for the SMTP server authentication.
11. Enter the sender's email address as the
From
setting.
12. Choose an
Address
field, enter the e-mail address, and select the alerts you want to receive there.
Repeat for up to three addresses. Your e-mail address can be up to 64 alphanumeric characters
long.
13. If you are using the PJLink protocol for projector control, turn on the
PJLink
setting in the Projector
Control menu and enter the IP address where you want to receive PJLink notifications as the
Notified IP Address
setting.
14. When you finish selecting settings, select
Return
and press
Enter
to return to the
Network
Settings
menu.
15. Select
Set
, and follow the on-screen instructions to save your settings and exit the menus.
Note:
If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Network Projector E-mail Alert Messages
Parent topic:
Using the Projector on a Network
Related references
Feature Settings - Operation Menu
Network Projector E-mail Alert Messages
When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you
receive an e-mail containing the following information:
• The email address entered as the
From
setting
•
Epson Projector
on the subject line
• The name of the projector experiencing a problem
• The IP address of the affected projector
• Detailed information about the problem
Note:
If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Parent topic:
Summary of Contents for EB-L520U
