89
6.
Select
Network Projection
and press
Enter
.
7.
Set the
Screen Sharing
setting to
On
.
8.
When you finish selecting settings, select
Return
and press
Enter
to return the
Network
Settings
menu.
9.
Select
Set
, and follow the on-screen instructions to save your settings and exit the menus.
When a projector on the same network shares its screen, the shared screen is automatically displayed
on your projector. If it isn't, press the
LAN
button on the remote control to switch to the screen sharing
source. To exit screen sharing, press the
Esc
button on the remote control.
Parent topic:
Related references
Network Settings - Network Menu
Setting Up Projector Network E-Mail Alerts
You can set up the projector to send you an e-mail alert over the network if there is a problem with the
projector.
Note:
If the
Standby Mode
setting is set to
Communication On
in the
Operation
menu, you can
receive e-mail alerts even if the projector is in standby mode (the power is off). The
Standby Mode
setting is displayed only if the
A/V Output
setting in the Signal I/O menu is set to
While Projecting
.
1.
Press the
Menu
button.
Summary of Contents for EB-L520U
