Epson EB-L520U, User Manual

Page: 234 / 332

234
Setting Options Description
Source Signal Format
Overscan
HDMI IN EQ Level
HDMI Out Intensity
Reset to Defaults
Displays settings selected for the current
input source
Signal Format : sets the video range for
certain input sources to match the setting of
an input source
Overscan : changes the projected image
ratio to make the edges visible by a
selectable percentage or automatically
when projecting a component signal
HDMI IN EQ Level : adjusts the HDMI input
signal for each HDMI port; change the level
if there is interference in the signal or there
is no projected image
HDMI Out Intensity : adjusts the signal
intensity from the HDMI ports; change if the
HDMI image does not display correctly (not
available on the PowerLite EB-L520U)
Reset to Defaults : resets all settings for
the current input source
EDID HDMI1
HDMI2
HDBaseT
EDID : describes the display capabilities of
your projector when the selected input
source is
HDMI ; change this setting as
necessary according to the resolution of the
current input source
A/V Output While Projecting
Always On
Determines when the projector outputs
audio and images to external devices; set
to
Always On to output audio and images
when the projector is in standby mode
Audio Output Auto
Audio1
Audio2
Sets the audio input port when projecting
from input sources other than HDMI, LAN,
and Screen Mirroring
HDMI Audio Output HDMI1 Audio Output
HDMI2 Audio Output
Sets the audio input port when projecting
from one of the HDMI ports