Epson EB-L400U User Manual Download

Page: 35 / 225

Turning On the Projector

Turn on the computer or video equipment you want to use after you turn on

the projector.

Connect the power cord to the projector's power inlet and plug it into

an electrical outlet.

The projector's power indicator turns blue. This indicates that the

projector is receiving power, but is not yet turned on (it is in standby

mode).

Press the power button on the control panel or remote control to turn

on the projector.
The projector beeps and the status indicator flashes blue as the

projector warms up. Once the projector is warmed up, the status

indicator stops flashing and turns blue.

• When

Quick Startup

is enabled in the projector's

Extended

menu, the projector becomes ready for use in several seconds

the next time you press the power button.

Extended

Operation

Quick Startup

Try the following if you do not see a projected image.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop

computer.

• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source Search] button on the control panel or remote control to

detect the source.

• Press the button for the desired video source on the remote control.
• If the Home screen is displayed, select the source you want to project.

Warning

• Never look into the projector lens when the light source is on. This can damage

your eyes and is especially dangerous for children.

• When turning on the projector at a distance using the remote control, make sure

there is no one looking into the lens.

• During projection, do not block the light from the projector with a book or other

objects. If the light from the projector is blocked, the area on which the light

shines becomes hot which could cause it to melt, burn, or start a fire. Also, the

lens may get hot due to the reflected light which could cause the projector to

malfunction. To stop projection, use the A/V Mute function, or turn off the

projector.

• When the

Direct Power On

setting is set to

in the projector's

Extended

menu, the projector turns on as soon as you plug it in.

Note that the projector also turns on automatically in cases such as

recovery from a power outage.

Extended

Operation

Direct Power On

• If you select a specific port as the

Auto Power On

setting in the

projector's

Extended

menu, the projector turns on as soon as it

detects a signal or cable connection from that port.

Extended

Operation

Auto Power On

Related Links

• "Home Screen"

p.36

• "Projector Setup Settings - Extended Menu"

p.158

Summary of Contents for EB-L400U


































































































































































































































Search results

Summary of Contents for EB-L400U

Reviews:

Related manuals for EB-L400U

Brands by name

Popular brands

Epson EB-L400U, User Manual

Search results

Summary of Contents for EB-L400U

Reviews:

Related manuals for EB-L400U

Brands by name

Popular brands