Projector Network Settings - Network Menu
168
Setting
Options
Description
Verify Server Cert.
Verify Server Cert.
: selects whether to
verify the server certificate when a CA
certificate has been set.
CA certificate
CA certificate
: imports the CA certificate
when using the
PEAP
,
PEAP-TLS
,
EAP-
TLS
, or
EAP-FAST
type.
RADIUS
Serv.Name
RADIUS Serv.Name
: enter the server
name to verify. You can enter up to 32
alphanumeric characters.
Channel
1ch
6ch
11ch
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
IP Settings
DHCP
IP Address
Subnet Mask
Gateway Address
DHCP
: set to
On
if your network assigns
addresses automatically; set to
Off
to
manually enter the network's
IP
Address
,
Subnet Mask
, and
Gateway
Address
using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
SSID Display
On
Off
Select whether to display the SSID on the
network standby screen and Home
screen.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen and
Home screen.
IPv6 Settings
Select the IPv6 settings if you want to
connect the projector to the network
using IPv6:
Setting
Options
Description
IPv6
IPv6
: set to
On
if you want to connect
the projector to the network using IPv6.
IPv6 is supported to monitor and control
the projector over a network using Epson
Web Control and PJLink.
Auto Configuration
Auto Configuration
: set to
On
to assign
addresses automatically according to the
Router Advertisement.
Use Temporary
Address
Use Temporary Address
: set to
On
if
you want to use a temporary IPv6
address.
Network Menu - Wired LAN Menu
Settings on the
Wired LAN
menu let you select the wired LAN settings.
s
Network
>
Network Configuration
>
Wired LAN
Summary of Contents for EB-L400U
Page 1: ...User s Guide ...
