Cautions on Lifting
Caution
Use the four eye bolts installed on the same surface of the projector to lift
it.
Only use the eye bolts when temporarily transporting the projector and not
for permanent installation. The projector could be damaged or could
malfunction.
Do not lift the projector with the front/back/side of the projector facing
up.
Make sure that the angle when lifting is 60 degrees or more.
Attention
When attaching directly to the projector
Use four commercially available eye bolts M8 (ankle length 11 to 16 mm) and
attach them to the four screw holes for eye bolts.
When attaching to the handle
Use four commercially available eye bolts M10 (ankle length 11 mm or more)
and attach them to the four screw holes for eye bolts on the handle.
Safety Warning and Cautions
6
Summary of Contents for EB-L30000U
