Epson EB-L30000U, User Manual

Page: 39 / 283

a

When adjusting the image height with the vertical lens shift, adjust
by moving the image from the bottom to the top. If it is adjusted
from the top to the bottom, the image position may move down
slightly after adjusting.

We recommend setting the focus, zoom, and lens shift at least 20
minutes after you start the projection, because images are not stable
right after turning on the projector.

The image will be clearest when the lens position is moved to the
home position.

If you hold down the [Lens Shift] button on the remote control or
the control panel for at least three seconds, the lens position moves
to the home position.

If you set A/V Output to Always On , you can move the lens
position to the home position even if the projector is in standby
mode.
s
Extended
-
A/V Settings
-
A/V Output
p.147
a
Press the [Lens Shift] button on the remote control or the control
panel.
Using the remote control Using the control panel
b
Press the [ ][ ][ ][ ] buttons to adjust the position of the
projected image.
Using the remote control Using the control panel
The displayed screen may differ depending on your lens.
c
Press the [Esc] button to finish the adjustment.
Adjusting the Image Size
a
This is not available for the ELPLR05.
Installing the Projector
39