Epson EB-L25000U, User Manual

Page: 85 / 231

Performing tiling automatically
Automatically sets the arrangement for the projectors being used. You can
make settings by operating only the master projector.
a
Location Setup is performed using the camera built into the front of
the projector. Do not block the camera or the projected images.
a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended , and then press the [ ]
button.
c
Select Projector Grouping , and then press the [ ] button.
d
Select the projectors that will be used for tiling, and then press the
[
] button.
(1) Select the projectors you want to use to enter a checkmark.
Select
Refresh to update the list. Select Sort to sort the projector order.
(2)
Select Set , and then press the [ ] button.
e
Select Tiling , and then press the [ ] button.
f
Select Tiling . Select Auto , and then press the [Esc] button.
g
Select Location Setup , and then press the [ ] button.
The image is positioned automatically.
When the message "Assign IDs to projectors that have been located.
Do you want to continue?" is displayed, select
Yes .
When setup is complete, the following screen is displayed.
Multi-Projection Function
85