Epson EB-L25000U, User Manual

Page: 70 / 231

A B
Illustration
90% 7,000 hours
80% 15,000 hours
70% 25,000 hours
60% 35,000 hours
50% 47,000 hours
40% 66,000 hours
30% 95,000 hours
a
•
This is an approximate guide only and may change depending on
usage and surroundings.
•
These times are the standard hours when using the projector
continuously without changing the
Brightness Level or Constant
Brightness settings and are not guaranteed.
•
When the usage time exceeds 20,000 hours, you may need to replace
parts inside the projector.
•
If you have used the projector beyond the standard constant time
when
Constant Brightness is set to On , you cannot set a higher
Brightness Level even if you set Constant Brightness to Off .
Setting the Amount of Light for the Projected
Image
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
a
Dynamic Contrast
can only be set when the
Color Mode
is set to
Dynamic
or
Cinema
.
a
Press the [Menu] button while projecting.
b
Select Dynamic Contrast from Image , and then press the [ ]
button.
c
Select Normal or High Speed , and then press the [ ] button.
The setting is stored for each color mode.
d
Press the [Menu] button to finish making settings.
Adjusting Projected Images
70