Epson EB-L25000U, User Manual

Page: 56 / 231

a
•
By pressing the [Geometry] button on the remote control or the
control panel, you can perform the selected adjustment method
directly.
•
When you want to re-adjust the projection position and so on, if
you want to release the correction status temporarily, set the
Geometry Correction to Off . Even when it is set to Off , the
correction values are saved.
s
Settings - Geometry Correction p.123
•
You can save the geometry correction settings using Memory in
Geometry Correction , and load them when needed.
s
"Memory Function" p.103
H/V-Keystone
This allows you to correct distortion in the horizontal and vertical
directions independently.
Use the following to check the adjustment range for the image.
s
"H/V-Keystone" p.212
a
Press the [Menu] button while projecting.
b
Select Geometry Correction from Settings .
c
Select H/V-Keystone , and then press the [ ] button.
"If this setting is changed, the image may be distorted." is displayed,
press the [
] button.
d
Use the [ ][ ] buttons to select the correction method, and
then use the [ ][ ] buttons to make the corrections.
Adjusting Projected Images
56