Epson EB-L1490U, User Manual

Page: 220 / 296

Epson Projector Management
Epson Projector Management lets you carry out operations such as checking
the status of multiple Epson projectors that are connected to a network at a
computer monitor, and controlling the projectors from the computer.
Download the Epson Projector Management software from the following
website.
http://www.epson.com
Changing Settings Using a Web Browser (Epson
Web Control)
By using a Web browser of a computer or mobile device connected to the
projector on a network, you can set functions and control the projector.
This function allows you to perform setup and control operations remotely.
Also, you can operate a specific projector when using multiple projectors.
Use Internet Explorer 9.0 or later or Microsoft Edge as the Web browser.
Use Safari for OS X.
a
If you set Standby Mode to Communication On , you can use the
Web browser to make settings and perform control even if the
projector is in standby mode (when the power is off).
s
Extended
-
Standby Mode
p.151
Displaying the Epson Web Control Screen
Use the following procedure to display the Epson Web Control screen.
Make sure your device and projector are ready for the network connection.
a
If your Web browser is set up to connect via a proxy server, the Epson
Web Control screen cannot be displayed. To display Web Control, you
need to make settings so that a proxy server is not used for a
connection.
a
Connect your device to the same network as the connected
projector.
The connection method varies depending on the device. See the
manual supplied with your device for details. When using a mobile
device, check the Wi-Fi settings.
b
Start the Web browser on your device.
Monitoring and Controlling
220