Epson EB-L1050U, User Manual

Page: 149 / 291

Submenu Function
A/V Settings
A/V Output : Set this to Always On if you want to output
audio and images to an external device even when the
projector is in standby status.
Monitor Out : Select the image source output to an external
monitor when the projector is in standby status. When set
to
Auto , analog RGB signals from the Computer port or the
BNC port are output depending on which source was
selected when the projector was turned off.
Audio Settings : Performs the following audio related
settings.
•
Audio Output : Select the audio to be output when
projecting images from the Computer port, BNC port, or
DVI-D port. When set to
Auto , audio is output from the
audio input port corresponding to each image input port.
s
"Connecting Equipment" p.47
•
HDMI Audio Output : Select the audio source when
projecting images from the HDMI port. If you select
HDMI , audio for the image is output as it is. If you select
Audio3 , audio is output from the Audio3 port.
Standby Mode If you set Communication On , you can perform the
following operations even if the projector is in standby
mode.
•
Monitor and control the projector over a network.
•
Output audio and images to an external device. (Only
when
A/V Output
is set to
Always On
.)
•
Communication from the HDBaseT port is enabled. (Only
when
Control Communications
is set to
On
.)
a
When monitoring or controlling the pro‐
jector using wireless LAN, set
Connection
Mode to Advanced .
s
Network - Wireless LAN - Connection
Mode p.154
Submenu Function
HDBaseT
Control Communications : (This cannot be set when
Extron XTP is set to On .) When set to On , Ethernet
communication, serial communication, and the wired
remote control through the HDBaseT Transmitter connected
to the HDBaseT port are all enabled.
Extron XTP : Set to On when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
http://www.extron.com/
a
•
When Control Communications or Ex‐
tron XTP is set to On , Standby Mode is
automatically set to Communication On .
•
When Control Communications or Ex‐
tron XTP is On , the projector's LAN
port, RS-232 port, and Remote port are
disabled.
•
When Extron XTP is set to On , the fan
may rotate in standby mode but this is
not abnormal.
List of Functions
149