Wired LAN menu
Submenu
Function
IP Settings
DHCP
: You can set whether or not (
On
/
Off
) to use DHCP
If this is set to
On
, you cannot set any more addresses.
IP Address
: You can input the IP Address
assigned to the
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
: You can input the Subnet Mask
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
: You can input the IP address for the gateway
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following Gateway Address
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
IP Address Dis-
play
To prevent the IP address from being displayed, set this to
Off
.
Mail menu
When this is set, you receive an email notification if a problem or warning
occurs in the projector.
s
"Reading error notification mail"
List of Functions
118
Summary of Contents for EB-G6870
