Epson EB-G6870, User Manual

Page: 110 / 196

Submenu Function
Noise Reduction
(This cannot be set when Image Processing is set to Fast .)
Smoothes out the roughness in progressive images. There are
two modes. Select your favorite setting. It is recommended that
this is set to
Off when viewing image sources in which noise is
very low, such as for DVDs.
Mosquito NR (This cannot be set when Image Processing is set to Fast .)
When a progressive signal is being input, you can reduce the
wavy noise that occurs in lines between areas with dramatic
changes in colors.
Video Range
Select the video range for the input signal from the HDMI port,
the DisplayPort, HDBaseT port, or the SDI port (EB-G6970WU
only). Set to
Expanded
if you are concerned about misadjusted
black levels or blown out highlights in the image.
Input Signal
You can select an input signal from the Computer port or BNC
port.
If set to
Auto , the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to
Auto
, select the
appropriate signal according to the connected equipment.
Video Signal
You can select an input signal from the Video port or S-Video
port. If set to
Auto , video signals are recognized automatically. If
interference appears in the image or a problem occurs such as no
image is being projected when set to
Auto , select the appropriate
signal according to the connected equipment.
Aspect
You can set the Aspect Ratio
g
for projected images.
s
"Changing the Aspect Ratio of the Projected Image" p.72
Scale
When using multiple projectors to project one image, adjust the
range of the image displayed by each projector.
s
"Scaling an Image (Scale)" p.85
Overscan
(This setting can only be adjusted when a component video
signal is being input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to
4% or 8% . When set to
Auto , this is automatically adjusted according to the input signal.
Submenu Function
Image Process-
ing
Changes settings for image processing.
Fast : Images are displayed quicker.
Fine : Images are displayed in higher quality.
DisplayPort EQ
Setting Adjusts the DisplayPort input signal level depending on the
devices connected to the DisplayPort. If there is a lot of
interference in the image, or if a problem such as no image being
projected occurs, select
1 or 2 , and then confirm the selection.
Reset
You can reset all adjustment values on the
Signal
menu to their
default settings, except for
Input Signal
,
Image Processing
and
DisplayPort EQ Setting
.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.122
Settings Menu
List of Functions
110