The following optional accessories and consumables are available. Please
purchase these products as and when needed. The following list of optional
accessories and consumables is current as of: March 2013. Details of
accessories are subject to change without notice and availability may vary
depending on the country of purchase.
Optional Accessories
Standard zoom lens ELPLS06
The lens equipped to models with lenses.
Short throw zoom lens ELPLU01
Rear projection wide lens ELPLR03
Middle throw zoom lens ELPLM04
Middle throw zoom lens ELPLM05
Long throw zoom lens ELPLL06
See the following for more information on the projection distance for each
lens.
s
"Screen Size and Projection Distance"
Computer cable ELPKC02
(1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
This is the same as the computer cable supplied with the projector.
Computer cable ELPKC09
(3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC10
(20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Use one of these longer cables if the computer cable supplied with the projector
is too short.
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male
^
3)
Use to connect a component video
source.
Remote control cable set ELPKC28
(10 m 2 piece set)
Use this to guarantee operation from the remote control from a distance.
Wireless mouse receiver ELPST16
Use this to use the projector's remote control to control the mouse pointer on
the computer or to page up and down.
HDBaseT Transmitter ELPHD01
This transmitter performs long distance transmissions for HDMI signals and
control signals for 1 LAN cable. Based on the HDBaseT
standard.
Polarizer ELPPL01
Attach to this projector when stacking two projectors and projecting 3D images.
Passive 3D Glasses (standard five piece set) ELPGS02A
Passive 3D Glasses (five piece set for children) ELPGS02B
Passive polarized 3D glasses. Use these when viewing 3D images with the
projectors.
Document Camera ELPDC11/ELPDC20
Use when projecting images such as books, OHP documents, or slides.
Ceiling pipe (450 mm)
*
ELPFP13
Ceiling pipe (700 mm)
*
ELPFP14
Use when installing the projector on a high ceiling.
Ceiling mount
*
ELPMB22
Use when installing the projector on a ceiling.
*
Special expertise is required to suspend the projector from a ceiling. Contact
your local dealer or the nearest address provided in the Epson Projector
Contact List.
s
Consumables
Lamp unit ELPLP76
Use as a replacement for used lamps.
Optional Accessories and Consumables
148
Summary of Contents for EB-G6800
