Epson EB-G5450WU, User Manual, Page: 46 / 171

q
•
If Password Protect is already activated, you must enter the
Password.
If the Password is entered correctly, the Password Protect setting
menu is displayed.
s
"Entering the Password" p.46
•
When the Password is set, stick the Password protect sticker in a
visible position on the projector as a further theft deterrent.
B
Turn on "Power On Protect".
(1) Select Power On Protect , and then press the [Enter] button.
(2) Select On , and then press the [Enter] button.
(3) Press the [Esc] button.
C
Turn on "User's Logo Protect".
(1) Select User's Logo Protect , and then press the [Enter] button.
(2) Select
On
, and then press the [Enter] button.
(3) Press the [Esc] button.
D
Turn on "Network Protect".
(1) Select
Network Protect
, and then press the [Enter] button.
(2) Select On , and then press the [Enter] button.
(3) Press the [Esc] button.
E
Set the Password.
(1) Select Password , and then press the [Enter] button.
(2) The message "Change the password?" is displayed, select Yes and then press
the [Enter] button. The default setting for the Password is "0000". Change
this to your own desired password. If you select
No , the screen shown in step
1 is displayed again.
(3) While holding down the [Num] button, enter a four digit number using the
numeric buttons. The number entered is displayed as "
* * * * ". When you
enter the fourth digit, the confirmation screen is displayed.
Remote Control
(4) Re-enter the Password.
The message "Password accepted." is displayed.
If you enter the Password incorrectly, a message is displayed prompting you
to re-enter the password.
Entering the Password
When the Password entry screen is displayed, enter the Password using the
numeric buttons on the remote control.
Procedure
While holding down the [Num] button, enter the Password by
pressing the numeric buttons.
When you enter the correct Password, projection begins.
Security Functions
46