Epson EB-92, User Manual

Page: 13 / 141

Control Panel
Name Function
A
[
t
] button
Turns the projector power on or off.
s
"From Installation to Projection" p.28
B
[Source Search]
button
Changes to the next input source that is sending an image.
s
"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.29
C
[Enter] button
•
When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•
If pressed while projecting analog RGB signals from the
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Display
Position.
Name Function
D
[
w
][
v
] buttons
•
Performs vertical keystone correction.
s
"Correcting keystone distortion in vertical
directions" p.34
•
If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s
"Using the Configuration Menu" p.71
s
"Using the Help" p.87
E
[
a
][
b
] button [
a
] Decreases the volume.
[
b
] Increases the volume.
s
"Adjusting the Volume" p.38
F
[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s
"Using the Help" p.87
G
[Esc] button
•
Stops the current function.
•
If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s
"Using the Configuration Menu" p.71
H
[
<
][
>
] buttons
•
Performs horizontal keystone correction.
s
"Correcting keystone distortion in horizontal
directions" p.35
•
If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s
"Using the Configuration Menu" p.71
s
"Using the Help" p.87
I
[Menu] button
Displays and closes the Configuration menu.
s
"Using the Configuration Menu" p.71
Part Names and Functions
13