Epson EB-824H, User Manual, Page: 95 / 136

This section explains how to replace the Remote Control batteries, the
Lamp, and the air filter.
Replacing the Remote Control Batteries
If delays in the responsiveness of the Remote Control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size manganese or alkaline batteries ready. You
cannot use other batteries except for the AA size manganese or alkaline.
Attention
Make sure you read the Safety Instructions before handling the batteries.
s Safety Instructions
Procedure
A
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
B
Replace the old batteries with new batteries.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to ensure
the batteries are inserted the correct way.
C
Attach the battery cover.
Press the battery compartment cover until it clicks into place.
Replacing the Lamp
Lamp replacement period
It is time to replace the Lamp when:
Replacing Consumables
95